-

Linux/force fchk on every boot.md

@@ -0,0 +1,90 @@
+# Force fchk on every boot
+
+[LinuxConfig.org - How to force fsck to check filesystem after system reboot on Linux](https://linuxconfig.org/how-to-force-fsck-to-check-filesystem-after-system-reboot-on-linux)
+
+## View and modify PASS value in /etc/fstab
+
+Now that we have learned about some `tune2fs` basics, let’s discuss PASS system configuration option found inside of the `/etc/fstab` file containing all on boot mountable partitions and their relevant mount options.
+
+First, use the `blkid` command to figure out the UUID value of the file system you want to check.
+
+```
+$ blkid /dev/sda3
+/dev/sda3: UUID="c020d4d8-c104-4140-aafc-24f7f89f8629" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="22ada8f4-5222-4049-b0fe-a3274516754d"
+```
+Then, grep for that UUID in the `/etc/fstab` file.
+
+```
+$ grep c020d4d8-c104-4140-aafc-24f7f89f8629 /etc/fstab 
+UUID=c020d4d8-c104-4140-aafc-24f7f89f8629 /               ext4    errors=remount-ro 0       0
+```
+
+The last column, which is column number 6, is the fsck PASS column. This is used by fsck to determine whether fsck should check the filesystem before it is mounted and in which order the given partitions in `/etc/fstab` should be checked. Possible entries for fstab PASS column are 0, 1 and 2. Here is what each number means.
+
+```
+0 – disabled, that is do not check filesystem
+1 – partition with this PASS value has a higher priority and is checked first. This value is usually set to the root / partition
+2 – partitions with this PASS value will be checked last
+The connection between fstab PASS value, last checked value, and number of mounts value is as follows:
+```
+
+During the system boot, the first value which is checked is fstab PASS value. If this value is 0, then no other values are checked and fsck will NOT perform filesystem check. However, if the PASS value found in `/etc/fstab` is any other than 0, that is 1 or 2, then values of maximum mounts and total mounts are checked.
+
+If the value of maximum mounts is greater or equal to total number of mounts value then fsck’s filesytem check will be performed. Few examples:
+
+```
+FSCK DISABLED
+fstab PASS: 1
+Maximum mount count:      -1
+Mount count:              157
+----
+FSCK DISABLED
+fstab PASS: 0
+Maximum mount count:      -1
+Mount count:              157
+----
+FSCK ON NEXT REBOOT
+fstab PASS: 1 or 2
+Maximum mount count:      1
+Mount count:              157
+----
+FSCK DISABLED
+fstab PASS: 0
+Maximum mount count:      1
+Mount count:              1
+----
+FSCK ON NEXT REBOOT
+fstab PASS: 1 or 2
+Maximum mount count:      1
+Mount count:              1
+----
+NO FSCK ON NEXT REBOOT
+fstab PASS: 1 or 2
+Maximum mount count:      200
+Mount count:              157
+```
+
+## Force fsck for root or non-root partitions
+
+To force filesystem check on a partition, we must first change fsck’s PASS value in `/etc/fstab` to value `2`. For example:
+`UUID=c6e22f63-e63c-40ed-bf9b-bb4a10f2db66 /mnt            ext4    errors=remount-ro 0      2`
+
+After this change has been made, see the command examples below to finish forcing `fsck` to run.
+
+To ensure that your file system is checked on the next reboot, we need to manipulate the filesystem’s “Maximum mount count” parameter. The following tune2fs command will ensure that filesystem `/dev/sdX` is checked every time your Linux system reboots. Please note that for this to happen the fsck’s PASS value in `/etc/fstab` must be set to a positive integer as discussed above.
+
+`$ sudo tune2fs -c 1 /dev/sdX`
+
+Note that this will continue to force fsck after every system reboot until you revert the setting.
+
+Alternatively we can set fsck after every 10 reboots:
+
+`$ sudo tune2fs -c 10 /dev/sdX`
+
+Or to disable the setting, use the value -1.
+
+`$ sudo tune2fs -c -1 /dev/sdX`
+
+OR
+
+`$ sudo tune2fs -c 0 /dev/sdX`

Linux/show time and date.md

@@ -0,0 +1,27 @@
+# Ubuntu 24.04: Change timezone
+
+## Changing Timezone via CLI (command line interface)
+
+### Enter the following command:
+
+Find your Timezone:
+
+`timedatectl`
+
+### List timezones
+
+`timedatectl list-timezones`
+
+### Find timezone you with to seet.
+
+`timedatectl list-timezones | grep Oslo`
+
+### Set New Timezone
+
+Apply the change by setting your system to the new timezone.
+
+`$ sudo timedatectl set-timezone Europe/Oslo`
+
+### Verify timezone settings
+
+`$ timedatectl`